Skip to navigation Skip to content

Harbour Status Matt Black Bath Shower Mixer Tap

Rated 1.00/5 from 1 customer review

RRP £205.91 save 25%

£154.99

In stock | Get it tomorrow

Order by 4pm and select Next Day (S)

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Bath shower mixer tap with hose and handset kit; ideally styled for modern bathrooms
  • Manufactured from reliable solid brass and finished in Matt Black for a clean, bold look
  • H: 135mm, Projection: 135.5mm
  • Fitted with ceramic disc cartridge valves for easy turning and leak-free longevity
  • Supplied with a matching handset wall bracket, for tidy storage when not in use

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Harbour Status Matt Black Bath Shower Mixer Tap

Harbour Status Matt Black Bath Shower Mixer Tap


Your bathroom shouldn't just be a room that you go in and then want to leave as quickly as possible. It should be a sanctuary; a place of calm where you can have a bit of time to yourself. We're not suggesting that you spend all day in there, but why shouldn't you take an extra 5 minutes in the morning to relax before you begin your day?

The Harbour Status range of matt black bathroom taps will transform your bathroom from 'drab' to 'fab' in the blink of an eye, and when put in contrast with white basins, baths and furniture, will make your bathroom the talk of the town and somewhere you'll want to spend more time. The Harbour Status matt black bath shower mixer comes with a matching shower handset and wall bracket and is covered by a 10 year guarantee.

Features:
• Includes shower handset, hose and wall bracket
• Eye-catching matt black finish - the perfect contrast to a white bath
• Made from solid brass
• Ceramic disc technology - easy to use and no drips
• Minimum 0.5 bar water pressure required
• 10 year guarantee

Dimensions:
• Height - 135mm
• Projection - 110mm
Product Code HBSTAT26
Global Trade Item Number 0729557187841
Type Bath Shower Mixers, Bridge Bath Taps
Brand Harbour
Brand Range Harbour Status
Minimum Water PressureMore information 0.5
Shape Rectangular, Round
Finish Matt Black
Style Modern
Mounting Type Deck Mounted
Tap Holes 2 Holes
Spout Type Straight Spout
Handle Type Round, Dual Control
Cartridge TypeMore information Ceramic Disc
Temperature Control Manual
Number of Outlets 2 Outlets
Height (mm) 135
Projection (mm) 110
GuaranteeMore information 10 Years
Flow Rate at 0.2 Bar (l/min) 10.8
Flow Rate at 0.5 Bar (l/min) 16.5
Flow Rate at 1 Bar (l/min) 23.5
Flow Rate at 1.5 Bar (l/min) 28.2
Flow Rate at 2 Bar (l/min) 32.6
Flow Rate at 3 Bar (l/min) 39.5

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.