-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Drag the image to view more angles
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Enjoy the best of both worlds with Harbour Stature Deck Mounted Pot Filler Kitchen Tap, which extends its utility beyond simply filling pots. Its adaptable design allows use for a variety of culinary tasks, including refilling coffee makers and kettles, as well as topping up or filling pasta pots and saucepans.
This versatile tap is not only a pot filler but also functions as a regular kitchen tap, providing flexibility in your culinary space. The deck-mounted design of this pot filler tap eliminates the need for complex retrofitting, making it an ideal choice for kitchen upgrades and renovations. Simply pre-drill the worktop, connect it to the water supply and enjoy the convenience of hot and cold water whenever you need it.
Features:
Dimensions:
This versatile tap is not only a pot filler but also functions as a regular kitchen tap, providing flexibility in your culinary space. The deck-mounted design of this pot filler tap eliminates the need for complex retrofitting, making it an ideal choice for kitchen upgrades and renovations. Simply pre-drill the worktop, connect it to the water supply and enjoy the convenience of hot and cold water whenever you need it.
Features:
- Deck mounted modern design for convenient installation and maintenance
- 360° swivel spout provides a space-saving solution, allowing you to conveniently fold the pot filler when not in use
- Available in two finishes: Chrome or Matt Black
- Durable stainless steel construction ensures longevity and resistance to corrosion
- Equipped with a ceramic disc cartridge for a leak-free and smooth mechanism
- Aerated spout provides a steady and efficient water flow
- Minimum water pressure: 1 bar
- Supplies cold and hot water
- Single handle control for an easy and smooth operation
- Includes flexi tails
- Complies with BS5412 and BS EN200 standards
- 10 year manufacturer’s guarantee
Dimensions:
- Total Height: 343mm
- Spout Exit Height: 325mm
- Maximum Projection: 358mm
- Deck Arm Projection: 175mm
- Spout Arm Projection: 183mm
- Base Diameter: 49mm
| Cleaning Instructions |
|---|
| Product Code | hrbr-stature-deck-pot-filler-pv |
|---|---|
| Type | Pot Fillers |
| Brand | Harbour |
| Brand Range | Harbour Stature |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Material | Stainless Steel |
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Lever |
| Spout Type | 360 Degree Swivel Spout, Straight Spout, Swivel Spout |
| Tap Holes | Mono |
| Style | Industrial, Modern |
| Finish | Select an option first |
| Texture | Select an option first |
| Height (mm) | 343 |
|---|---|
| Projection (mm) | 358 |
| Flow Rate at 1 Bar (l/min) | 6.6 |
|---|---|
| Flow Rate at 3 Bar (l/min) | 11.5 |
| Flow Rate at 5 Bar (l/min) | 15.1 |
| Minimum Water PressureMore information | 1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
5 Benefits of Having a Pot Filler in Your Kitchen
Isn't it about time that life was a little easier in the kitchen? Say hello to the gadget we're craving! Here's how you'll benefit from having a pot filler in your kitchen.
