-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
£199.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Harbour Clarity Deck Mounted Bath Shower Mixer Tap - Gunmetal
This contemporary deck mounted bath tap comes with a handy shower handset bringing versatility and convenience to your bathing routine. The 1.5m shower hose provides generous length and manoeuvrability while the handset ensures dependable performance. The wall mounted holder means the handset is easily accessible maximising your bathroom space. This WRAS approved bath tap is made from solid brass and is equipped with ceramic disc technology guaranteeing exceptional durability and long lasting reliability. This tap boasts an aerated spout that infuses air into the water, creating a gentle, “champagne-like” flow that adds a touch of luxury.
Features:
Features:
- Contemporary bath shower mixer tap in a stunning Gunmetal finish
- Tap body made from brass for durability and longevity
- Tap handles are crafted from zinc alloy providing an easy to clean and corrosion and rust resistance surface
- Shower handset and wall mounted handset holder manufactured from ABS to provide a tough material that has a strong resistance to rust and corrosion
- 1.5m shower hose is made from PVC which is strong, easy to clean and maintain and won’t scratch your bathtub
- Ceramic disc technology preventing excess drips and leaks
- Aerated spout mixes air into the water to create a soft, “champagne-like” flow
- Dual lever control for effortless operation of water flow and temperature
- Minimum 0.5 bar water pressure
- Complies with BS5412 and BSEN200
- WRAS approved
- Includes a shower handset and wall mounted holder, a 1.5m hose and an outlet elbow
- 5 year manufacturer’s guarantee
| Cleaning Instructions |
|---|
| Product Code | HBCLA124 |
|---|---|
| Type | 2 Hole Bath Taps, Bath Shower Mixers, Bridge Bath Taps |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Material | Brass, Zinc Alloy |
| Number of Outlets | 2 Outlets |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | WRAS Approved |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Gunmetal |
| Shape | Curved |
| Handle Type | Dual Control, Lever, Round |
| Spout Type | Curved Spout, Fixed Spout |
| Texture | Brushed |
| Tap Holes | 2 Holes |
| Style | Modern |
| Hose Length (mm) | 1500 |
|---|---|
| Width (mm) | 180 |
| Height (mm) | 149 |
| Depth (mm) | 147 |
| Projection (mm) | 119 |
| Flow Rate at 0.5 Bar (l/min) | 11.6 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 16.6 |
| Flow Rate at 2 Bar (l/min) | 22.9 |
| Flow Rate at 3 Bar (l/min) | 26.7 |
| Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
