-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
This deck mounted bath filler showcases a modern design paired with outstanding performance featuring dual lever control for easy adjustment of flow and temperature. The aerated spout produces a gentle, “champagne-like” flow adding a hint of luxury to your bathing experience. This WRAS approved bath filled is crafted from solid brass and features ceramic disc technology, ensuring durability and long-lasting reliability.
Features:
Features:
- A beautiful deck mounted bridge bath filler that looks great in any bathroom and provides access to all areas of your bath and tap for ease of cleaning and maintaining
- Tap body crafted from brass body and tap handle made from zinc alloy providing durability, antibacterial properties and a high resistance to corrosion
- Ceramic disc technology preventing excess drips and leaks
- Aerated spout mixes air into the water to create a soft, “champagne-like” flow
- Minimum 0.5 bar water pressure
- Dual lever for effortless control of water flow and temperature
- WRAS approved
- Complies with BS5412 and BSEN200
- Matching bath waste sold separately, please see our recommended extras
- 5 year manufacturer’s guarantee
| Cleaning Instructions |
|---|
| Product Code | hrb-clarity-deck-bath-filler-pv |
|---|---|
| Type | 2 Hole Bath Taps, Bath Fillers, Bridge Bath Taps |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Material | Brass, Zinc Alloy |
| Number of Outlets | 1 Outlet |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | WRAS Approved |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Curved |
| Handle Type | Dual Control, Lever, Round |
| Spout Type | Curved Spout, Fixed Spout |
| Tap Holes | 2 Holes |
| Style | Modern |
| Finish | Select an option first |
| Texture | Select an option first |
| Width (mm) | 213 |
|---|---|
| Height (mm) | 149 |
| Depth (mm) | 147 |
| Projection (mm) | 119 |
| Flow Rate at 0.5 Bar (l/min) | 13.3 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 19.3 |
| Flow Rate at 2 Bar (l/min) | 27.9 |
| Flow Rate at 3 Bar (l/min) | 34.5 |
| Flow Rate at 4 Bar (l/min) | 40 |
| Flow Rate at 5 Bar (l/min) | 58.8 |
| Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
