-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Features:
Flow Rates:
- Bath filler with click clack waste
- Eye-catching matt black finish
- ABS hardened plastic filler with solid brass click clack plug
- Available in two finishes
- 3 in 1 function - inlet, outlet and overflow
- Minimalist design keeps your bath ledge clutter-free
- Flexible overflow for easy installation and easy fitting whatever the shape of your bath
- Bath valves required (sold separately)
- Minimum 0.5 bar water pressure required
- 15 year guarantee from Crosswater
Flow Rates:
- Flow rate at 0.2 bar - 10 l/min
- Flow rate at 0.5 bar - 15 l/min
- Flow rate at 1 bar - 20 l/min
- Flow rate at 2 bar - 28 l/min
- Flow rate at 3 bar - 34 l/min
Please note, this product does not include valves. Choose from our range of compatible bath valves to complete your setup and add optional extras such as a thermostatic shower or handset.
 Cleaning Instructions
|
|---|
| Product Code | xwater-mpro-ind-of-bath-filler |
|---|---|
| Type | Clicker Bath Wastes, Overflow Bath Fillers |
| Brand | Crosswater |
| Brand Range | Crosswater MPRO |
| Guarantee |
15 Years |
| Global Trade Item Number | Select an option first |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | ABS Plastic, Brass |
|---|---|
| Cartridge Type |
Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Spout Type | Overflow Spout |
| Style | Modern |
| Finish | Select an option first |
| Texture | Select an option first |
| Height (mm) | 71 |
|---|---|
| Projection (mm) | 44 |
| Flow Rate at 0.5 Bar (l/min) | 15 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 20 |
| Flow Rate at 2 Bar (l/min) | 28 |
| Flow Rate at 3 Bar (l/min) | 34 |
| Minimum Water Pressure |
0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
