-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
If you're treating yourself to a luxury shower head, you'd be a fool not to get your hands on the Crosswater MPRO 2 outlet concealed thermostatic shower valve too! Made from solid brass, this stunning shower valve boasts ceramic disc technology to ensure a long lifetime, thermostatic control to maintain your preferred temperature, alongside both WRAS and TMV2 approval to assure you of its excellent quality! The top dial of this gorgeous valve diverts the water to your chosen outlet such as a shower head or overflow bath filler, whilst the bottom dial controls the water temperature. With such a great look and functionality, this MPRO shower valve is more than desirable - especially with that very comforting 15 year manufacturer's guarantee too!
Please note that a minimum water pressure of 1 bar is required for this product.
Features:
Dimensions:
Please note that a minimum water pressure of 1 bar is required for this product.
Features:
- 2 outlet thermostatic bath and shower valve
- WRAS and TMV2 approved
- 6 finish options: Brushed Brass, Matt Black, Polished Chrome, Brushed Stainless Steel, Brushed Bronze or Slate
- Portrait back plate orientation
- Ceramic disc technology - easy to use and long lasting
- Minimum 1 bar water pressure required
- Thermostatic control keeps the water at the temperature you set
- Top dial diverts the water to your chosen outlet and controls the water flow
- Bottom dial controls the water temperature
- Fully serviceable from the front
- 15 year manufacturer's guarantee (subject to online registration - please click here)
Dimensions:
- Height - 215mm
- Depth - 152mm
- Width - 120mm
| Product Code | crosswater-mpro-2-outlet-shower-valve-pro1510-pv |
|---|---|
| Type | Concealed Shower Valves |
| Brand | Crosswater |
| Brand Range | Crosswater MPRO |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | Brass |
|---|---|
| Number of Outlets | 2 Outlets |
| Temperature Control | Thermostatic |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | WRAS Approved |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Wall Mounted |
|---|---|
| Shape | Square |
| Handle Type | Dual Control, Round |
| Style | Modern |
| Orientation | Portrait |
| Finish | Select an option first |
| Texture | Select an option first |
| Width (mm) | 120 |
|---|---|
| Height (mm) | 215 |
| Projection (mm) | 152 |
| Minimum Water PressureMore information | 1 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
