-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Recreate the timeless elegance of Victorian era with this fabulous freestanding bath mixer. The sumptuous Crosswater Belgravia Crosshead Floor Standing Bath Filler blends a classically-inspired design alongside the most modern of features.
The Flühs Valve with ceramic disc cartridge delivers a smooth and precise operation of the water flow and temperature. Fed by two chrome plated pipes connected to the underfloor pipework, the wide-mouth spout will provide an efficient flow, so the water won't lose heat while waiting for the tub to be filled, guaranteeing you a lavish bathing experience. The crosshead-shaped handles are elegantly engraved, showcasing the attention to details of its craftsmanship.
With high-performance and durability, the Crosswater Belgravia Crosshead Floor Standing Bath Filler will help you create the perfect luxurious refuge from your busy everyday life.
Features:
Make your bathroom even more luxurious with Crosswater Belgravia Collection for bathroom accessories.
The Flühs Valve with ceramic disc cartridge delivers a smooth and precise operation of the water flow and temperature. Fed by two chrome plated pipes connected to the underfloor pipework, the wide-mouth spout will provide an efficient flow, so the water won't lose heat while waiting for the tub to be filled, guaranteeing you a lavish bathing experience. The crosshead-shaped handles are elegantly engraved, showcasing the attention to details of its craftsmanship.
With high-performance and durability, the Crosswater Belgravia Crosshead Floor Standing Bath Filler will help you create the perfect luxurious refuge from your busy everyday life.
Features:
- Traditional Victorian design
- Independent hot and cold flow controls
- Flühs® anti-drip cartridge
- Manual temperature setting
- High-resistant brass construction
- Available in anti-rust polished chrome
- 1 bar minimum water pressure
- Stand-mounted taps
- Wide-mouth bath spout
- Spout Projection: 165mm
- Height: 907mm
- Leg adjustment distances: 150mm min - 180mm max
Make your bathroom even more luxurious with Crosswater Belgravia Collection for bathroom accessories.
| Cleaning Instructions |
|---|
| Product Code | crosswater-bel-bath-filler-tap |
|---|---|
| Type | Bath Fillers, Freestanding Bath Taps |
| Brand | Crosswater |
| Brand Range | Crosswater Belgravia Crosshead |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | Brass |
|---|---|
| Number of Outlets | 1 Outlet |
| Temperature Control | Manual |
| Cartridge TypeMore information | Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Freestanding |
|---|---|
| Finish | Polished Chrome |
| Shape | Round |
| Handle Type | Crosshead, Dual Control |
| Spout Type | Curved Spout |
| Texture | Polished |
| Tap Holes | 2 Holes |
| Style | Traditional |
| Height (mm) | 907 |
|---|---|
| Projection (mm) | 165 |
| Flow Rate at 0.2 Bar (l/min) | 10 |
|---|---|
| Flow Rate at 0.5 Bar (l/min) | 20 |
| Flow Rate at 1 Bar (l/min) | 26 |
| Flow Rate at 3 Bar (l/min) | 31.5 |
| Minimum Water PressureMore information | 1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
