£999.99
Recommended extras
We've hand-picked these items because they are a great choice alongside the Crosswater 3ONE6 Stainless Steel Floorstanding Bath Shower Mixer Tap
- Made from high grade 316 stainless steel which offers more resistance against corrosion than 304 steel
- The extra corrosion resistance makes grade 316 stainless steel more suitable for use in the bathroom where the steel will get wet
- The brushed stainless steel finish also makes the 3ONE6 range less prone to fingerprints
- Exquisite floorstanding bath shower mixer with pencil shower handset
- Intricately detailed handle adds a touch of finesse, but also helps turning the tap on and off when you have wet hands
- The shower handest has easy clean nozzles which make clearing any limescale build-up a breeze
- Easy to use single lever design and diverter to switch between the tap and shower handset
- Ceramic disc technology - long-lasting and no drips
- Minimum 3 bar water pressure required
- 15 year guarantee from Crosswater (subject to online registration - please click here)
Dimensions:
- Height - 905mm
- Spout exit height - 747mm
- Projection - 300mm
Product Code | TS416FS |
---|---|
Global Trade Item Number | 5056553403190 |
Type | Bath Shower Mixers, Freestanding Bath Taps |
Brand | Crosswater |
Brand Range | Crosswater 3ONE6 |
GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
AeratorMore information | Yes |
---|---|
Material | 316 Stainless Steel |
Cartridge TypeMore information | Ceramic Disc |
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Freestanding |
---|---|
Finish | Stainless Steel |
Shape | Round |
Handle Type | Lever, Single Control |
Spout Type | Curved Spout, Fixed Spout |
Texture | Brushed |
Style | Modern |
Height (mm) | 905 |
---|---|
Projection (mm) | 300 |
Flow Rate at 3 Bar (l/min) | 18.57 |
---|---|
Flow Rate at 4 Bar (l/min) | 21.67 |
Flow Rate at 5 Bar (l/min) | 23.73 |
Minimum Water PressureMore information | 3 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.