-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
The Butler & Rose Loretta bath shower mixer is impeccable from every angle. From its crosshead handles to the telephone cradle that holds the shower handset, there isn't a part of it that hasn't been meticulously designed. Underneath the period styling, however, is a thoroughly modern tap. It is made from solid brass and then plated in solid chrome, and controlling the water flow are the latest ceramic disc cartridges. The Loretta comes complete with a shower handset, hose and holder, as well as a 10 year guarantee.
Features:
Dimensions:
Features:
- Stunning traditional design
- Includes shower hose, telephone-style handset and holder
- High quality polished chrome finish
- Ceramic disc technology - long-lasting and no drips
- Minimum 0.5 bar water pressure
- Bath waste sold separately - please see our recommended extras
- 10 year guarantee
Dimensions:
- Overall height - 283mm
- Spout exit height - 22mm
- Projection - 153mm
Cleaning Instructions |
---|
Product Code | BRLOR10 |
---|---|
Type | Bath Shower Mixers, Bridge Bath Taps |
Brand | Butler & Rose |
Brand Range | Butler & Rose Loretta |
GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Material | Brass |
---|---|
Number of Outlets | 2 Outlets |
Temperature Control | Manual |
Cartridge TypeMore information | Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Deck Mounted |
---|---|
Finish | Chrome |
Shape | Round |
Handle Type | Crosshead, Lever, Triple Control |
Spout Type | Curved Spout |
Texture | Polished |
Tap Holes | 2 Holes |
Style | Traditional |
Width (mm) | 140 |
---|---|
Height (mm) | 283 |
Depth (mm) | 157 |
Projection (mm) | 153 |
Flow Rate at 0.5 Bar (l/min) | 16 |
---|---|
Flow Rate at 1 Bar (l/min) | 23.2 |
Flow Rate at 1.5 Bar (l/min) | 28.7 |
Flow Rate at 2 Bar (l/min) | 34 |
Flow Rate at 3 Bar (l/min) | 38 |
Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.