We've hand-picked these items because they are a great choice alongside the Butler & Rose Alba Traditional Kitchen Bridge Mixer - Antique Brass
- Stunning antique brass finish
- Elegant dual lever design
- Modern quarter-turn ceramic disc cartridges prevent any drips
- Swivel spout makes it perfect for 1.5 and 2 bowl sinks
- Adjustable cranked legs make retro-fit easy. Tap hole width can be between 139 and 221mm wide
- Minimum 0.5 bar water pressure required
- Champagne diffuser in spout
- Genuine ceramic lever handles
- 10 year guarantee
- Width - 360mm
- Overall height - 296.5mm
- Spout exit height - 241mm
- Projection - 182mm
|Global Trade Item Number||5056585205311|
|Type||2 Hole Kitchen Taps, Kitchen Bridge Mixers|
|Brand||Butler & Rose|
|Brand Range||Butler & Rose Alba|
|GuaranteeMore information||10 Years|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Dual Control|
|Spout Type||Swivel Spout|
|Tap Holes||2 Holes|
|Minimum Water PressureMore information||0.5|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
If you're looking to ditch the plastic and find a more sustainable way to drink clean water without the shop-bought bottle, the Vellamo complete water filter kit is exactly what you need. Read our handy blog post to learn more about how you can save the planet and drink beautifully filtered water in your own home.
Replacing a kitchen tap is a staple DIY procedure that is actually rather simple once you get your head around all of the connections occurring in the cupboard below the sink. Stick with Tap Warehouse as our expert team takes you on this comprehensive guide to seamless kitchen tap installation!
There are many unsurpassable benefits to having a pull out kitchen tap with a spray hose, so discover the reasons why every kitchen should have one.
A collection of some of the best performing low water-pressure taps - all available at amazing prices.
GONE are the days before ceramic disc taps. That's right - no more rubber rings screwed over the end of metal pipes, splitting as they wear down, leaking and costing every homeowner thousands a year in water bills. Learn why choosing taps with ceramic disc cartridges is the smartest option for you and your home.