-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Designed to complement freestanding and roll-top baths, this striking bath and shower mixer anchors your space with its tall, floor-mounted profile and elegant telephone-style cradle. The manual three-handle design offers precise control over your water flow, while the flexible handheld shower adds a layer of modern convenience to the classic bathing experience.
Features:
Features:
- Floor-standing design creates a traditional centerpiece alongside any freestanding or roll-top bath
- Combines the relaxation of a bath with the everyday convenience of a handheld shower
- 3 separate handles make it easy to adjust the temperature or switch to the shower with a simple turn
- Classic telephone-style cradle adds to the traditional look and keeps the handset within reach
- Ceramic-style levers make it simple to manage the water flow of each tap with a single motion
- Single spout mixes hot and cold water for more precise temperature control when filling a bath
- 1.5m shower hose has a generous reach for washing hair, rinsing the bath or bathing pets
- High-grade brass and stainless steel construction provides natural resistance to rust and corrosion
- Ceramic discs ensure the handles turn smoothly and stop the taps from dripping when turned off
- A practical solution for baths without tap holes, the mixer stands independently to fill your tub
- Choose from a range of finishes to coordinate with your existing basin taps and accessories
- Optimised for systems with 1.0 bar pressure or more to deliver a steady water flow
- Includes all necessary floor-mounting hardware for a solid, wobble-free installation
- WRAS approved to ensure compliance with UK water regulations for safety and quality performance
- Waste sold separately, please see our recommended extras for a finish that complements your bath
- Designed to pair with the wider Butler & Rose Eliza range to create a cohesive look in your space
- 10 year manufacturer’s guarantee on chrome, with a 5 year manufacturer’s guarantee for all other finishes
| Product Code | br-eliza-lvr-fs-bth-shw-tap |
|---|---|
| Type | Bath Shower Mixers, Freestanding Bath Taps |
| Brand | Butler & Rose |
| Brand Range | Butler & Rose Eliza |
| GuaranteeMore information | Various |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | No |
|---|---|
| Material | Brass, Ceramic, Stainless Steel, Zinc Alloy |
| Number of Outlets | 2 Outlets |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | WRAS Approved |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Freestanding |
|---|---|
| Shape | Curved, Round |
| Handle Type | Dual Control, Lever |
| Spout Type | Curved Spout, Fixed Spout |
| Tap Holes | 2 Holes |
| Style | Traditional |
| Finish | Select an option first |
| Texture | Select an option first |
| Hose Length (mm) | 1500 |
|---|---|
| Width (mm) | 267 |
| Height (mm) | 966 |
| Depth (mm) | 192 |
| Projection (mm) | 148 |
| Flow Rate at 1 Bar (l/min) | 12.9 |
|---|---|
| Flow Rate at 1.5 Bar (l/min) | 16.5 |
| Flow Rate at 2 Bar (l/min) | 19.7 |
| Flow Rate at 3 Bar (l/min) | 23.9 |
| Flow Rate at 5 Bar (l/min) | 30.2 |
| Minimum Water PressureMore information | 1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
