Skip to navigation Skip to content

nuie Edwardian 1 Outlet WRAS Approved Concealed Thermostatic Shower Valve

No reviews yet - Write one

RRP £513.00 save 52%


Loading delivery estimate...

Pay 3 interest-free instalments of £81.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £61.25 with Clearpay Learn more about Clearpay

What's great about it?

  • Traditional style crosshead design
  • Made in Britain
  • Thermal protection to preven scalding

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the nuie Edwardian 1 Outlet WRAS Approved Concealed Thermostatic Shower Valve

nuie Edwardian 1 Outlet Concealed Thermostatic Shower Valve -

Do you want a traditional look for your bathroom? Bring an Edwardian sensibility to your bathroom with this traditional shower. You will definitely want to look at the Beaumont Twin Valve Traditional Plate. It has a classy style that is just not found in many fixtures anymore and will work well in a contemporary or traditional bathroom. High gloss chrome finish, white valve, and attention to detail ensure that this shower valve is one that will beautify your bathroom in a perfect way.

Made in Britain

• WRAS, TMV2 and TMV3 approved - WRAS Approval Number 1703023
• Can be fitted vertically or horizontally
• Accurate flow control
• Thermostatic control to +/- 2 to 3°C even if the water pressure fluctuates
• Automatic shut down in the event of hot or cold water failure for full thermal protection
• Highly resistant to rust, stain and calcium build up - even in hard water areas
• Suitable for use with all plumbing systems
• Excellent flow rates - even at low pressure
• Fully reversible cartridge
• Manufactured from high quality brass & ABS
• Made in Britain

WRAS Approved
Downloads Product PDF
Product Code A3033
Global Trade Item Number 5055146196679
Type Concealed Shower Valves
Brand nuie
Width (mm) 120
Brand Range nuie Edwardian
Height (mm) 210
Mounting Type Wall Mounted
Finish Polished Chrome
Shape Rectangular
Handle Type Crosshead, Lever, Dual Control
Minimum Water PressureMore information 0.1
Style Traditional
Orientation Landscape, Portrait
GuaranteeMore information 5 Years
Number of Outlets 1 Outlet
Temperature Control Thermostatic
Cartridge TypeMore information Ceramic Disc
Flow Rate at 0.1 Bar (l/min) 5.5
Flow Rate at 0.5 Bar (l/min) 14
Flow Rate at 1 Bar (l/min) 20
Flow Rate at 2 Bar (l/min) 29
Flow Rate at 3 Bar (l/min) 44

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.