-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
A Stainless Steel kitchen is the embodiment of low-maintenance sophistication and ultra-modern look. Stainless steel is stain resistant and regarded as the most hygienic metal, since it has no pores on the surface to find and it's easily cleaned. It is also a very robust and durable material.
The Rangemaster Glendale Single Bowl Kitchen Sink & Vellamo Revolve Monobloc Mixer Kitchen Tap Pack is supplied with waste kit and a built-in drainer, for a sleek and seamless design. Furthermore, the inset sink is finished with a subtle ground-edge trim and fitted clips and seals, making it quick and easy to install. With reversible right or left hand instalattion, this brushed stainless steel sink and tap pack will fit perfectley into any layout and budget.
Rangemaster Glendale Single Bowl Stainless Steel Kitchen Sink Features:
Vellamo Revolve Monobloc Mixer Tap Features:
The Rangemaster Glendale Single Bowl Kitchen Sink & Vellamo Revolve Monobloc Mixer Kitchen Tap Pack is supplied with waste kit and a built-in drainer, for a sleek and seamless design. Furthermore, the inset sink is finished with a subtle ground-edge trim and fitted clips and seals, making it quick and easy to install. With reversible right or left hand instalattion, this brushed stainless steel sink and tap pack will fit perfectley into any layout and budget.
Rangemaster Glendale Single Bowl Stainless Steel Kitchen Sink Features:
- Contemporary single bowl kitchen sink
- Built-in Reversible Drainer for extra flexibility and functionality
- Includes basket waste kit
- Easy installation and cleanning
- Stain and heat resistant
- Soft Brushed Stainless Steel Micro-Sheen finish
- Overall dimensions: 950mm x 508mm
- Bowl dimensions: 360mm x 424mm
- Cut out size: 930mm x 488mm
- Made from 0.7mm stainless steel
- Reversible tap hole: 35mm
- 25 year guarantee
Vellamo Revolve Monobloc Mixer Tap Features:
- Single lever monobloc mixer kitchen tap
- Made from high quality stainless steel
- Modern brushed effect
- Curved design for easy clean of pots and pans
- Reversible lever: right or left hand
- Easy to use quarter turn single lever handle
- Ceramic disc technology - no more drips
- WRAS approved
- Swivel spout
- Deck Mount installation
- Includes tap fixing kit
- Low pressure kitchen tap: minimum 0.5 bar required
- 368mm height from bottom to top
- Spout projection: 200mm
- 3 year guarantee
| Product Code | rmaster-glend-ss-revolve-mono |
|---|---|
| Type | Stainless Steel Sink & Tap Packs |
| Brand | Rangemaster |
| Brand Range | Rangemaster Glendale |
| GuaranteeMore information | Various |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Number of Bowls | 1 Bowl |
|---|---|
| Material | Stainless Steel |
| Drainer | Left Hand Drainer, Right Hand Drainer, Single Drainer |
| Stainless Steel Thickness (mm) | 0.7 |
| Capacity (ltr) | 23.5 |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | Includes Waste Kit, Suitable for Waste Disposers |
| Drilled HolesMore information | 1 Pre-Drilled Tap Hole |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
This tells you how many holes there are on the sink to mount your kitchen tap.
For sinks with a reversible drainer (one that can be on the left or right) the pre-drilled or pre-scored tap holes will be on both sides of the sink.
For sinks with a handed drainer, the pre-drilled or pre-scored tap holes will only be on one side of the sink.
| Mounting Type | Inset |
|---|---|
| Finish | Brushed Stainless Steel |
| Shape | Rectangular |
| Handle Type | Lever, Single Control |
| Spout Type | Swan Neck Spout, Swivel Spout |
| Texture | Brushed |
| Style | Modern |
| Orientation | Left Hand Main Bowl, Right Hand Main Bowl |
| Width (mm) | 950 |
|---|---|
| Height (mm) | 155 |
| Depth (mm) | 508 |
| Projection (mm) | 200 |
| Flow Rate at 0.5 Bar (l/min) | 5.4 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 7.2 |
| Flow Rate at 2 Bar (l/min) | 10.8 |
| Flow Rate at 3 Bar (l/min) | 12.4 |
| Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Need more help?
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
How to Choose the Best Material for Your Kitchen Sink
Deciding on the best material for your kitchen sink is hard, so this guide has been created to help take some pressure off. We'll discuss the pros and cons of stainless steel, granite composite and ceramic kitchen sinks to help you make an informed decision on the right one for you. -
How To Clean A Stainless Steel Sink
Discover some smart and budget-friendly methods that will help you restore the shine to your stainless steel sink.