Skip to navigation Skip to content

Vellamo Koro Single Lever Mono Kitchen Mixer - Brushed Gold

Rated 4.75/5 from 4 customer reviews

RRP £180.19 save 33%


In stock | Get it Tuesday

Order by 4pm Monday and select Next Day Delivery (S)

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Vellamo mono kitchen mixer
  • Made from solid brass with an eye-catching brushed gold finish
  • Features 360° swivel spout and easy to use single lever
  • Ceramic disc valves for improved performance & longer life span
  • 2 years guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Vellamo Koro Single Lever Mono Kitchen Mixer - Brushed Gold

Vellamo Koro Single Lever Mono Kitchen Mixer - Brushed Gold

A noteworthy centrepiece to any sink, the Vellamo Koro knows how to stand out. Made completely from solid brass and given the finishing touch of brushed gold, this tap isn't just a pretty face. A swivel spout guarantees maximum flexibility as you effortlessly switch the water flow between the bowls of your kitchen sink.

• Made from solid brass with an eye-catching brushed gold finish
• 360° swivel spout gives maximum flexibility in the kitchen
• Easy to use single lever design - adjust the temperature and water flow with one hand
• Ceramic disc valves for improved performance & longer life span
• Includes flexi-tails for easy installation
• Minimum 1 bar water pressure required
• Maximum 5 bar water pressure
• 2 year guarantee

• Overall height - 335.5mm
• Spout exit height - 245.5mm
• Projection - 200mm
• Tap hole size required - Ø35mm

Not the tap for you? The Vellamo Koro is also available in other eye-catching finishes
Product Code KTA035
Global Trade Item Number 5090239201007
Type Mono Kitchen Mixers
Brand Vellamo
Brand Range Vellamo Koro
Minimum Water PressureMore information 1
Shape Round
Finish Brushed Gold
Style Modern
Mounting Type Deck Mounted
Tap Holes Mono
Spout Type Swivel Spout
Handle Type Lever, Single Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 335
Projection (mm) 200
Minimum Tap Hole SizeMore information 35mm
AeratorMore information Yes
GuaranteeMore information 2 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.