Skip to navigation Skip to content

Vellamo Aspire Basin Mixer & Bath Filler Pack

Rated 5.00/5 from 1 customer review

RRP £231.00 save 44%


In stock | Get it tomorrow

Order by 4pm and select Next Day (S)

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Bath filler tap and basin mixer set with striking angular design ideal for modern bathrooms
  • Manufactured from reliable solid brass in a Polished Chrome finish that adds sleek appeal
  • Fitted with ceramic disc cartridge valves for easy turning and leak-free longevity
  • Supplied with a basin clicker waste at no additional cost for an even more attractive offer

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Vellamo Aspire Basin Mixer & Bath Filler Pack

Vellamo Aspire Basin Mixer & Bath Filler Bundle

Vellamo Aspire Bath Filler Tap
• Includes tap connectors
• Suitable for all water systems
• Minimum required water pressure: 0.5 bar
• 10 year manufacturer's guarantee comes as standard for your peace-of-mind

Bath Filler Flow Rates:
• Flow rate at 0.5 bar is 13.2 l/min.
• Flow rate at 1.0 bar is 20.0 l/min
• Flow rate at 1.5 bar is 22.6 l/min
• Flow rate at 2.0 bar is 24.1 l/min
• Flow rate at 3.0 bar is 28.0 l/min

Vellamo Aspire Basin Mixer with Clicker Waste
• Includes slotted basin clicker waste
• Includes flexible tails and tap connector kit
• Suitable for all water systems
• Minimum required water pressure: 0.2 bar
• 10 year manufacturer's guarantee comes as standard for your peace-of-mind

Basin Mixer Flow Rates:
• Flow rate at 0.2 bar is 6.5 l/min
• Flow rate at 0.5 bar is 9.2 l/min
• Flow rate at 1.0 bar is 12.7 l/min
• Flow rate at 1.5 bar is 16.2 l/min
• Flow rate at 2.0 bar is 18.7 l/min
• Flow rate at 3.0 bar is 22.1 l/min
Product Code vellamo-asp-basin-bath-filler-pk
Type Basin & Bath Tap Packages
Brand Vellamo
Brand Range Vellamo Aspire
Minimum Water PressureMore information 0.5
Shape Square
Finish Polished Chrome
Style Modern
Mounting Type Deck Mounted
Spout Type Straight Spout
Handle Type Lever
Cartridge TypeMore information Ceramic Disc
Temperature Control Manual
AeratorMore information Yes
GuaranteeMore information 10 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.