-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
The Flova Dekka 4 Piece Bath Mixer Set features soft geometric forms. With a bold square design contrasting with subtle curves to the underside of the spout and levers, this bath shower mixer will add functionality and style to your bathroom.
Made from virgin brass, the Dekka Range is built with contaminant-free material with incontestable durability. In addition, the brassware is manufactured with Diamond Chrome finish, for a smooth and dust-proof polished surface with a long-lasting shine. As proof of its quality, all Flova brassware is supplied with a 15-year warranty; and all working parts, such as cartridges and seals, are covered for 3 years.
Features:
Made from virgin brass, the Dekka Range is built with contaminant-free material with incontestable durability. In addition, the brassware is manufactured with Diamond Chrome finish, for a smooth and dust-proof polished surface with a long-lasting shine. As proof of its quality, all Flova brassware is supplied with a 15-year warranty; and all working parts, such as cartridges and seals, are covered for 3 years.
Features:
- 4 piece bath set
- European CE certificated
- Diamond Chrome plating for ease-of-clean & high-shine finish
- Constructed from low-lead high-quality brass
- Rust & corrosion resistant
- Quarter turn ceramic disc technology for smooth & drip-free performance
- 2-way diverter behind spout to switch outlet from bath tap to handshower
- Twin handles for independent control of hot and cold supplies
- Non-thermostatic manual temperature setting
- With single function pull out handset & flexible hose
- Minimum 0.5 bar water pressure is recommended
- If water supply exceeds 3.0 bar, the use of pressure reducing valve is recommended
- Mounting plate dimension: 60x60mm
- 15 year guarantee from Flova - (subject to online registration - please click here for further details)
- Waste sold separately
| Technical Specifications |
|---|
| Cleaning Instructions |
| Product Code | DE4HBSM |
|---|---|
| Type | Bath Shower Mixers, Concealed Bath Taps |
| Brand | Flova |
| Brand Range | Flova Dekka |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Number of Outlets | 2 Outlets |
|---|---|
| Temperature Control | Manual |
| Cartridge TypeMore information | Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Polished Chrome |
| Shape | Rectangular, Square |
| Handle Type | Dual Control, Square |
| Spout Type | L-Shaped Spout |
| Texture | Polished |
| Tap Holes | 4 Holes |
| Style | Modern |
| Height (mm) | 224 |
|---|---|
| Projection (mm) | 200 |
| Minimum Water PressureMore information | 0.5 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
