-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
This shower and bath package brings together thoughtful design and practical features, including a 2 outlet thermostatic valve, a fixed shower head with a ceiling arm, and an overflow bath filler for a streamlined look. The dual-handle valve provides precise control over water flow and temperature, with an automatic shut-off feature for anti-scald protection. Built from durable brass, it can be installed in either a portrait or landscape orientation to suit your space and comes with an easy fitting kit for straightforward installation. The valve also features an Anti-Calc cartridge with advanced anti-debris technology, preventing blockages and limescale buildup for smooth, consistent performance. WRAS approved and designed with a sleek, modern finish, this package offers a reliable and stylish solution for your bath and shower.
Please note: This product is temporarily supplied with a 3-handle valve instead of a 2-handle valve. This is a temporary change and does not affect the functionality or quality of the product
Shower Valve Features:
Please note: This product is temporarily supplied with a 3-handle valve instead of a 2-handle valve. This is a temporary change and does not affect the functionality or quality of the product
Shower Valve Features:
- Two outlet, triple handle control for precise temperature and flow adjustments. The top and bottom handles control the shower accessories and the middle handle controls the water temperature.
- Thermostatic valve with auto-shut off mechanism preventing scalding from sudden changes in temperature
- Pre-set temperature control of 38°C with a push button override to 48°C
- Anti Calc thermostatic cartridge helps prevent blockages and limescale build up
- Ceramic disc technology prevents any unwanted leaks or drips
- Brass body, stainless steel faceplate and zinc-alloy handles built to be resilient against corrosion
- Interchangeable backplate design allows portrait or landscape orientation
- Minimum 0.5 bar water pressure
- WRAS approved
- 5 year manufacturer’s guarantee
Slide Rail Kit Features: - Includes 806mm slide rail, shower handset, adjustable handset holder and 1500mm PVC shower hose
- Brass and stainless steel construction for optimum strength and reliability
- PVC shower hose offers durability and can withstand exposure to water and soap
- Minimum 1 bar water pressure
- Covered by a 5 year manufacturer’s guarantee
Shower Head & Arm Features: - 250mm diameter
- 165mm height
- Stainless steel shower head in an ultra slim design for a contemporary feel
- Easy clean rubber nozzles, makes removing limescale build-up a breeze
- Minimum 0.2 bar water pressure
Wall Outlet & Elbow Features: - Brass construction provides longevity
- Suitable for all plumbing systems
- Standard G1/2" BSP tail
| Product Code | har-clar-bz-2o-vlv-cm-hd-slidekt |
|---|---|
| Type | Concealed Shower Sets |
| Brand | Harbour |
| Brand Range | Harbour Clarity |
| GuaranteeMore information | Various |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | Brass, PVC, Stainless Steel, Zinc Alloy |
|---|---|
| Number of Outlets | 2 Outlets |
| Temperature Control | Thermostatic |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | Easy Clean Nozzles, WRAS Approved |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Ceiling Mounted |
|---|---|
| Finish | Brushed Bronze |
| Shape | Round |
| Handle Type | Triple Control |
| Texture | Brushed |
| Style | Modern |
| Hose Length (mm) | 1500 |
|---|
| Flow Rate at 0.5 Bar (l/min) | 8.6 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 12.2 |
| Flow Rate at 2 Bar (l/min) | 17.3 |
| Flow Rate at 3 Bar (l/min) | 21.2 |
| Flow Rate at 4 Bar (l/min) | 24.6 |
| Flow Rate at 5 Bar (l/min) | 27.4 |
| Minimum Water PressureMore information | 1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
