£51.99
Recommended extras
We've hand-picked these items because they are a great choice alongside the nuie Beaumont Basin Pillar Taps
- The perfect upgrade to any traditional style bathroom
- High quality brass internals with luxury chrome finish
- Chrome finish
- Suitable for use with flow regulators
- Waste not included
- Manufacturer provides 5 years guarantee (excluding serviceable parts)
- 0.1 bar minimum water pressure
- Easy installation
Dimensions:
- 11.5cm H x 9cm D
Product Code | I321XE |
---|---|
Global Trade Item Number | 5055146102045 |
Type | 2 Hole Basin Mixers, Basin Pillar Taps, Cloakroom Basin Mixers |
Brand | nuie |
Brand Range | nuie Beaumont |
GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Cartridge TypeMore information | Compression Washer |
---|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Deck Mounted |
---|---|
Finish | Polished Chrome |
Shape | Round |
Handle Type | Crosshead, Dual Control |
Spout Type | Fixed Spout, Straight Spout |
Texture | Polished |
Tap Holes | 2 Holes |
Style | Traditional |
Height (mm) | 115 |
---|---|
Projection (mm) | 90 |
Flow Rate at 0.1 Bar (l/min) | 8 |
---|---|
Flow Rate at 0.5 Bar (l/min) | 24 |
Flow Rate at 1 Bar (l/min) | 33 |
Flow Rate at 2 Bar (l/min) | 44 |
Minimum Water PressureMore information | 0.1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.