Skip to navigation Skip to content

Crosswater North Mini Basin Mixer Tap - Matt Black

Rated 5.00/5 from 1 customer review

RRP £199.00 save 27%


Loading delivery estimate...

Pay 3 interest-free instalments of £48.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £36.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Monoblock basin mixer
  • Mini design to be paired with cloakroom basins
  • Matt Black finish
  • Minimum water pressure 0.5 bar
  • 15 year manufacturers guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Crosswater North Mini Basin Mixer Tap - Matt Black

Crosswater North Mini Basin Mixer Tap - Matt Black

Small en-suite bathrooms and cloakrooms may be a little lacking when it comes to general size, but there's no reason they can't be just as stylish as our full sized bathrooms! Pair your cloakroom basin with the stunning Crosswater North Mini Basin Mixer Tap for the perfect touch of pizzazz. Boasting a minimalist single lever design for precise control over your water flow and temperature, alongside a jaw-dropping contemporary matt black finish, this basin mixer certainly isn't "mini' when it comes to its features.

Ceramic disc cartridge technology prolongs the life of your basin tap and simultaneously prevents any dripping or leaks for a hassle-free lifetime. For the full matt black aesthetic - why not pair this sleek mini basin mixer with the rest of the Crosswater North matt black range? There's also a pretty convincing 15 year manufacturer's guarantee included for peace of mind if you're after some extra reassurance.

• Crosswater North basin mixer
• Matt Black finish
• Monobloc design - one tap hole
• Mini design perfect for a cloakroom basin
• Deck Mounted
• Lever control
• Ceramic disc cartridge
• Recommended minimum water pressure 0.5 bar
• Waste not included, please see recommended extras
• 15 year manufacturer's guarantee

Height: 125mm
Spout projection: 107mm
Product Code NO114DNM
Global Trade Item Number 5055833690473
Type Mono Basin Mixers, Cloakroom Basin Mixers
Brand Crosswater
Width (mm) 50
Brand Range Crosswater North
Height (mm) 125
Mounting Type Deck Mounted
Finish Matt Black
Shape Curved
Handle Type Lever
Spout Type Straight Spout
Minimum Water PressureMore information 0.5
Tap Holes Mono
Style Modern
GuaranteeMore information 15 Years
Projection (mm) 107
Cartridge TypeMore information Ceramic Disc
AeratorMore information Yes

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.