Skip to navigation Skip to content

nuie Viscount Bath Filler

No reviews yet - Write one

RRP £136.00 save 52%


Loading delivery estimate...

Pay 3 interest-free instalments of £21.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £16.25 with Clearpay Learn more about Clearpay

What's great about it?

  • Deck-mounted bath filler tap with crosshead handle design to suit traditional baths
  • Manufactured from reliable solid brass and finished in Polished Chrome adding sleek appeal
  • H: 96mm, W: 220mm, D: 190mm
  • Separate hot and cold water flows allows for easier control over your bath's temperature

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the nuie Viscount Bath Filler

nuie Viscount Bath Filler -

The nuie Viscount bath filler is a lovely example of a traditional bathroom tap. The whole tap is a masterpiece, but perhaps the finest part of it is the exquisite detailing of the 'H' and 'C' on the crosshead handles.

The Viscount 2 hole bath filler may be traditional in design, but it is made using modern techniques and materials, and backed up by a 5 year guarantee from nuie.

• Chrome finish
• Suitable for all water systems
• Minimum 0.1 bar water pressure
• 5 year guarantee

• Pipe centres - 180mm
Product Code X363
Global Trade Item Number 5055369011810
Type Bath Fillers, Bridge Bath Taps
Height (mm) 105
Brand nuie
Brand Range nuie Viscount
Flow Rate at 0.1 Bar (l/min) 9
Flow Rate at 0.5 Bar (l/min) 31
Flow Rate at 1 Bar (l/min) 42
Mounting Type Deck Mounted
Finish Polished Chrome
Flow Rate at 2 Bar (l/min) 50
Shape Round
Handle Type Crosshead, Dual Control
Spout Type Curved Spout
Minimum Water PressureMore information 0.1
Tap Holes 2 Holes
Style Traditional
GuaranteeMore information 5 Years
Projection (mm) 142
Number of Outlets 1 Outlet
Temperature Control Manual
Cartridge TypeMore information Ceramic Disc

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.


Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.