Skip to navigation Skip to content

Vellamo Touch Control Single Lever Mono Kitchen Mixer Tap - Brushed Nickel

Rated 3.86/5 from 7 customer reviews

RRP £263.14 save 45%

£144.99 was £154.99

In stock | Get it Tuesday

Order by 4pm Monday and select Next Day (S)

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Kitchen mixer tap with touch technology - touch any part of the tap spout to turn it on
  • 360° swivel spout - perfect for use with 1.5 and 2 bowl sinks
  • Powered by AA batteries - no mains connection required
  • Includes flexi-tail connectors and a tap fixing kit
  • 5 year manufacturers guarantee

Read full product description

Offer

Recommended extras

We've hand-picked these items because they are a great choice alongside the Vellamo Touch Control Single Lever Mono Kitchen Mixer Tap - Brushed Nickel

Vellamo Touch Control Mono Kitchen Mixer Tap - Brushed Nickel


Features:
• Touch technology - touch any part of the tap spout to turn it on and off (see video below to see how it works)
• Powered by AA batteries (not included) for easy installation - no mains connection required and the batteries last for up to 1 year
• Includes flexi-tail connectors and a tap fixing kit
• 360° swivel spout - perfect for use with 1.5 and 2 bowl sinks
• Made from SS304 stainless steel with a brushed nickel finish
• Ceramic disc technology - long-lasting and no drips
• Easy to use single lever design
• Minimum 1 bar water pressure required
• Compatible with worktops up to 40mm in thickness
• Neoperl aerator for a soft, splash-free water flow
• IPX5 rated
• 5 year guarantee

Dimensions:
• Overall height - 355mm
• Spout exit height - 275mm
• Projection - 220mm

Please note: The below video is for illustration purposes only to demonstrate the touch technology. The tap you will receive is the same as pictured above.
Product Code VELTOUCH02
Type Mono Kitchen Mixers
Brand Vellamo
Brand Range Vellamo Touch
Minimum Water PressureMore information 1
Shape Round
Finish Brushed Nickel
Style Modern
Mounting Type Deck Mounted
Tap Holes Mono
Spout Type U-Shaped Spout, 360 Degree Swivel Spout
Handle Type Lever, Single Control, Touch Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 355
Projection (mm) 220
AeratorMore information Yes
GuaranteeMore information 5 Years
IP Rating X5
Flow Rate at 1 Bar (l/min) 3.6
Flow Rate at 1.5 Bar (l/min) 4.8
Flow Rate at 2 Bar (l/min) 5.9
Flow Rate at 3 Bar (l/min) 7.6
Flow Rate at 4 Bar (l/min) 9.0

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.