Vellamo Twist 2 Outlet Concealed Thermostatic Shower Valve
Vellamo's cool, contemporary and minimalist thermostatic dual outlet shower valve is a powerful mix of form and function, and a sure-fire way of upgrading your bathroom and shower style. Fitted with cutting-edge anti-scald technology, the Minimalist shower valve thermostatically controls water temperature on both outlets, and the 0.2 bar minimum water pressure makes it suitable for medium & high pressure water systems. The top handle controls one outlet, the bottom handle controls a second outlet, whilst the middle handle is used to set the temperature.
• Minimalist sleek design
• Accurate water flow control
• Temperature thermostatically controlled to prevent scalding
• Emergency shut-off in the event of hot or cold water failure
• Lifetime guarantee
• Height - 280mm
• Width - 120mm
|Type||Concealed Shower Valves|
|Brand Range||Vellamo Twist|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Material||Brass, ABS Plastic|
|Number of Outlets||2 Outlets|
|Cartridge TypeMore information||Ceramic Disc|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Wall Mounted|
|Handle Type||Lever, Round, Triple Control|
|Flow Rate at 0.2 Bar (l/min)||6.5|
|Flow Rate at 0.5 Bar (l/min)||9.7|
|Flow Rate at 1 Bar (l/min)||14|
|Flow Rate at 2 Bar (l/min)||20.5|
|Flow Rate at 3 Bar (l/min)||27|
|Minimum Water PressureMore information||0.2|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.