Skip to navigation Skip to content

Tre Mercati Maverick Bath Taps (Pair)

Rated 4.00/5 from 1 customer review

RRP £104.58 save 41%

£61.99

Estimated delivery 7-10 working days Help?

Too long to wait? View similar products with next day shipping

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Deck-mounted bath tap pair with a contemporary crosshead handle style to suit modern baths
  • Manufactured from durable solid brass with a Polished Chrome finish that adds sleek appeal
  • H: 120mm, W: 50mm, D: 130mm
  • Fitted with ceramic disc cartridge technology for easy turning and leak-free longevity
  • Separate hot and cold flow valves give greater control over your bath's temperature

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Tre Mercati Maverick Bath Taps (Pair)

Tre Mercati Maverick Bath Taps (Pair)

Downloads Product PDF
Product Code 68020
Global Trade Item Number 5032308680207
Type Bath Fillers, Bath Pillar Taps
Brand Tre Mercati
Brand Range Tre Mercati Maverick
Minimum Water PressureMore information 0.1
Shape Round
Finish Polished Chrome
Style Modern
Mounting Type Deck Mounted
Tap Holes 2 Holes
Spout Type Curved Spout
Handle Type Crosshead, Dual Control
Cartridge TypeMore information Ceramic Disc
Temperature Control Manual
Number of Outlets 2 Outlets
Height (mm) 120
Projection (mm) 100
GuaranteeMore information 10 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.