Skip to navigation Skip to content

Crosswater Totti Basin 3 Hole Set with Pop-Up Waste

Rated 4.50/5 from 2 customer reviews

RRP £335.00 save 28%


Expected delivery from 12th July Help?

Too long to wait? View similar products with next day shipping

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Swan neck basin mixer twin with crosshead handles for improved temperature control
  • Hard-wearing brassware with corrosion-resistant chrome plating
  • Pop-up basin waste included
  • Suitable for low water pressure systems
  • 15 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Crosswater Totti Basin 3 Hole Set with Pop-Up Waste

Crosswater Totti Basin 3 Hole Set with Pop-Up Waste

For a truly sublime blend of classic and contemporary, look no further than the elegant Crosswater Totti II basin 3 hole set with pop-up waste. This striking basin mixer tap boasts a timeless crosshead lever design for precise control over water flow and temperature, alongside a swivel spout for a hassle-free way to keep your basin looking clean, shiny and new.

With a striking deck mounted design, timeless chrome finish and plethora of impressive features, the Totti ticks all of the boxes, and then some! Ceramic disc technology works to prolong the life of your tap and prevent any drips or leaks, whilst the 15 year manufacturer's guarantee offers some extra reassurance when it comes to quality. This charming Crosswater tap even comes with a pop-up waste to take care of the less-exciting but equally important practical bits.

• Minimum 0.2 bar water pressure
• Chrome finish
• Ceramic disc technology
• Double crosshead handles: separated hot & cold water control
• Includes tap fixing kit & flexible hose connectors
Downloads Product PDF
Product Code TO135DPC+
Global Trade Item Number 5055833689279
Type 3 Hole Basin Mixer Taps
Brand Crosswater
Brand Range Crosswater Totti II
Minimum Water PressureMore information 0.2
Shape Round
Finish Chrome
Style Modern, Traditional
Mounting Type Deck Mounted
Tap Holes 3 Holes
Spout Type Swan Neck Spout, Swivel Spout
Handle Type Crosshead, Dual Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 285
Projection (mm) 151
Material Brass
AeratorMore information Yes
GuaranteeMore information 15 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.


Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.