Skip to navigation Skip to content

Perrin & Rowe Provence Bridge Sink Mixer with Crosshead Handles & Pull-Out Hand Rinse

No reviews yet - Write one

RRP £1,020.00 save 18%

£839.99

Please select an option

Estimated delivery 40-50 working days Help?

Too long to wait? View similar products with next day shipping

FREE standard delivery*. Read full delivery info

What's great about it?

  • Kitchen sink bridge mixer with pull-out spray rinse with insulated handle
  • 4 finishes available: Chrome, Nickel, Pewter or Gold effect
  • Single flow tap for better flow rare & well-mixed water
  • Twin handles for temperature and flow control & push button to divert water to hand rinse
  • Suitable for high water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Perrin & Rowe Provence Bridge Sink Mixer with Crosshead Handles & Pull-Out Hand Rinse

Perrin & Rowe Provence Bridge Sink Mixer with Crosshead Handles & Pull-Out Hand Rinse


The Provence Range taps are a reminder of the flamboyant Baroque period where exuberant styling and extravagant detailing were all the vogue. This collection has bucket loads of presence and are a delight to use - all models have the latest quarter turn ceramic disc valves and the spouts swivel silkily from the uppermost junction. This takes away strain from the tap and reduces flex on the sink when the spout is moved.
This product features a Perrin & Rowe Hand Rinse. Easy to use and versatile, the rinses can be positioned to the left or the right of the sink. They have insulated handles and a flexible hose (standard length 120cm) ensuring safety and convenience. Hot, cold or mixed water is diverted to the rinse once the top button is pressed.

Quality Promise:
• Manufactured in the UK from the highest quality raw materials
• Employing the latest available technology and made from low lead brass
• Plated to a thickness that exceeds industry standards
• Assembled by hand and individually water tested to ensure peace of mind
• Made with ceramic disk valves supplied by the world's leading manufacturer, tested to 5000,000 life cycles, equating to at least 25 years of domestic use.

Made in Britain


Features:
• Available in chrome, polished nickel, pewter or gold finish
• 5 year guarantee
• Minimum 1 bar pressure required
• Recommended working pressure: 1-5 bar
• Quarter turn ceramic disc flow control
• Single Flow spout
• 360° swivel spout
• Vernier insert for accurate handle alignment
• Unique handle construction with integral bearing ring
• Twin crosshead handles
• Independent pull out spray rinse with insulated handle

Dimensions:
• 25mm diameter mounting hole size
• 30mm diameter rinse mounting hole size
• Tap hole centres - 200mm
• 60cm pull-out hose length
Product Code 4755IG
Type 3 Hole Kitchen Taps, Kitchen Bridge Mixers
Brand Perrin & Rowe
Brand Range Perrin & Rowe Provence
Minimum Water PressureMore information 1
Shape Round
Style Traditional
Mounting Type Deck Mounted
Tap Holes 3 Holes
Spout Type Curved Spout, Swivel Spout
Handle Type Crosshead, Dual Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 270
Projection (mm) 230
GuaranteeMore information 5 Years
Finish Gold
Minimum Tap Hole SizeMore information Tap: 25mm; Rinse: 30mm
Hose Length 600mm
AeratorMore information No

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.