Skip to navigation Skip to content

nuie Eon Sink Mixer With Swivel Spout

No reviews yet - Write one

RRP £80.00 save 46%

£42.99

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £14.33 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £10.75 with Clearpay Learn more about Clearpay

What's great about it?

  • Top lever monobloc kitchen mixer with swivel spout
  • Hard-wearing brassware with corrosion-resistant polished chrome plating
  • Single lever design for effortless one-hand control
  • Ceramic disc valves for improved performance & longer life span
  • Suitable for all water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the nuie Eon Sink Mixer With Swivel Spout

nuie Eon Sink Mixer With Swivel Spout -


Simplicity at its finest, without compromising on quality.

Other Features:
• Solid brass body with polished chrome finish
• Minimum 0.1 bar water pressure required
• Pivoting spout ideal for 1.5 or double bowl sinks
• Ceramic disc valves for improved performance and longer life span

Dimensions:
• Height - 116mm
• Projection - 216mm
• Tap hole size - 35mm
Downloads Product PDF
Product Code DTY306
Global Trade Item Number 5055146154259
Type Mono Kitchen Mixers
Brand nuie
Brand Range nuie Eon
Height (mm) 116
Mounting Type Deck Mounted
Finish Polished Chrome
Shape Round
Handle Type Lever, Single Control
Spout Type Straight Spout, Swivel Spout
Minimum Water PressureMore information 0.1
Tap Holes Mono
Style Modern
GuaranteeMore information 5 Years
Projection (mm) 216
Minimum Tap Hole SizeMore information 35mm
Cartridge TypeMore information Ceramic Disc
Flow Rate at 0.1 Bar (l/min) 2
Flow Rate at 0.5 Bar (l/min) 5
Flow Rate at 1 Bar (l/min) 7.5
Flow Rate at 2 Bar (l/min) 11
Flow Rate at 3 Bar (l/min) 12

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

£42.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.