Skip to navigation Skip to content

Deva Profile Twin Lever Monobloc Sink Mixer

Rated 4.43/5 from 7 customer reviews
Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £31.99 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £24.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Monobloc kitchen mixer with swivel spout & round handles
  • 2 finishes available: White or Beige
  • Dual flow tap for reduced risk of backflow& ensure hygienic operation
  • Full turn compression valve mechanism
  • Suitable for low water pressure systems

Read full product description

With no fuss or frills, the Deva Profile in matt beige will suit modern and traditional kitchens with a similar colour tones. Sometimes a white kitchen taps can seem too clinical, and metal taps can be tricky to keep watermark free, this modern tap with a continuous and even beige colour could then be a better option if so!

Suitable for high and low-pressure systems, the Profile from Deva has two separate hot and cold water flows within the tap. It also features two side control levers that are clearly marked with temperature indicators for ease of use.

Features:
  • 1 Tap hole
  • Deck mounted
  • X2 Tap handles
  • Made from brass
  • Minimum water pressure 0.1
  • Maximum water pressure 5.0 bar
  • Handle Type: Round
  • Suitable for both domestic and commercial applications
  • Single spout with divided flow: hot and cold water remains separate within the tap for safe and hygienic operation

Dimensions:
  • Height 200mm
  • Projection 190mm
  • Spout to base 65mm

Please Note: If your tap is splashing when it's used, the tap may not be correct for your water pressure and this can be adjusted under your sink. Alternatively, you can contact us for help.

Downloads
Cleaning Instructions
Product Overview
Product Code DCP124/004-pv
Type Mono Kitchen Mixers
Brand Deva
Brand Range Deva Profile
GuaranteeMore information 12 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
Cartridge TypeMore information Compression Washer
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Shape Round
Handle Type Dual Control, Round
Spout Type Curved Spout, Swivel Spout
Tap Holes Mono
Style Modern
Finish Select an option first
Texture Select an option first
Dimensions
Height (mm) 200
Projection (mm) 190
Flow Rate
Minimum Water PressureMore information 0.1

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(7)
Rated 4.43/5 from 7 customer reviews

From £95.99

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.