£208.99
Recommended extras
We've hand-picked these items because they are a great choice alongside the Crosswater Verge Deck Mounted Bath Filler
- Deck-mounted bath filler tap in a bold modern design
- Available in 4 different finishes: Matt Black, Brushed Brass, Chrome & Brushed Stainless Steel Effect
- Separate hot and cold water valves give greater control over your bath's temperature
- Crafted from brass
- Minimum 1 bar water pressure required
- Bath waste sold separately - please see recommended extras
- Ceramic disc technology for smooth operation and no excess dripping or leaking once turned off
- 15 year guarantee from Crosswater - (subject to online registration - please click here for further details)
Dimensions:
- Height: 153mm
- Width: 220mm
- Projection: 140mm
Product Code | VR322DC |
---|---|
Type | Bath Fillers |
Brand | Crosswater |
Brand Range | Crosswater Verge |
GuaranteeMore information | 15 Years |
Global Trade Item Number | 5055833665617 |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Material | Brass |
---|---|
Temperature Control | Manual |
Cartridge TypeMore information | Ceramic Disc |
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Deck Mounted |
---|---|
Shape | Square |
Handle Type | Dual Control, Lever |
Spout Type | Straight Spout |
Tap Holes | 2 Holes |
Style | Modern |
Finish | Chrome |
Width (mm) | 220 |
---|---|
Height (mm) | 153 |
Projection (mm) | 140 |
Minimum Water PressureMore information | 1 |
---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.