Skip to navigation Skip to content

Crosswater MPRO Wall Mounted Basin Mixer Tap - Brushed Brass

Rated 4.00/5 from 4 customer reviews

RRP £369.00 save 35%

£238.99 was £269.99

In stock | Get it tomorrow

Order by 4pm and select Next Day (S)

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Wall-mounted 2 hole basin mixer with curved spout & single lever
  • Hard-wearing brassware with stylish brushed brass finish
  • Wall-mounted installation with concealed fixings for a clutter-free countertop
  • Ideal for use with basins with no pre-punched tap holes
  • Suitable for medium & high water pressure systems

Read full product description

Offer

Recommended extras

We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Wall Mounted Basin Mixer Tap - Brushed Brass

Crosswater MPRO Wall Mounted Basin Mixer Tap - Brushed Brass



Say hello to the perfect bathroom tap: the Crosswater MPRO wall mounted basin mixer tap. Whilst we’re of course totally enamoured with that elegant brushed brass finish, there’s so much more to this beautiful basin tap than meets the eye! Made from solid brass, the MPRO comes with 2 spout projections of 150mm & 230mm to ensure a good fit for your bathroom, ceramic disc technology to prevent any unwanted drips, and a minimalist single lever design for easy use. With all of these great features and a 15 year manufacturer’s guarantee, this stunning basin tap is right up there as one of our favourite basin taps!

Please note that a minimum water pressure of 0.5 bar is required for this product.

Features:
• Wall mounted basin tap - create a minimalist look in your bathroom
• Stylish brushed brass finish
• Made from solid brass
• Comes with two spout lengths with a projection of either 150mm or 230mm
• Single lever design for easy use
• Ceramic disc technology - long lasting and no drips
• Minimum 0.5 bar water pressure required
• 15 year guarantee from Crosswater

Dimensions:
• Height - 95mm
• Projection - 150mm or 230mm
Product Code PRO120WNF
Global Trade Item Number 5055833647804
Type 2 Hole Basin Mixers, Wall Mounted Basin Taps
Brand Crosswater
Brand Range Crosswater MPRO - Brushed Brass
Minimum Water PressureMore information 0.5
Shape Round
Finish Brushed Brass
Style Modern
Mounting Type Wall Mounted
Tap Holes 2 Holes
Spout Type Curved Spout, Fixed Spout
Handle Type Lever, Single Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 60
GuaranteeMore information 15 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.