Skip to navigation Skip to content

Crosswater KH Zero 6 Bath Filler

No reviews yet - Write one

RRP £399.00 save 28%

£286.99

Estimated delivery 3-7 working days Help?

Too long to wait? View similar products with next day shipping

FREE standard delivery*. Read full delivery info

What's great about it?

  • Deck-mounted bath filler bridge tap with a bold, geometric design to suit modern bathrooms
  • Manufactured from reliable solid brass and finished in rust-resistant Polished Chrome
  • H: 130mm, W: 225mm, D: 187mm
  • Fitted with ceramic disc cartridge technology for easy turning and leak-free longevity
  • Separate hot and cold water valves give greater control over your bath's temperature

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Crosswater KH Zero 6 Bath Filler

Crosswater KH Zero 6 Bath Filler


If you're looking for something out of the ordinary, Crosswater's deck mounted bath filler from the KH Zero 6 range offers you the latest in elegant, contemporary design and modern tap technology.

Sitting at a slight angle, this two tap hole bath filler is a sleek, clean-cut fixture, sure to grab attention in any bathroom. Its levers lift and move with ease, and ensures precise control over water flow. With a minimum water pressure requirement of only 0.5 bar, the KH Zero 6 bath filler is suitable for most water systems.

Designed with style by interior designer Kelly Hoppen, this tap also comes with a 15 year manufacturer's guarantee from Crosswater, for your peace of mind.

Features:
• Ceramic disc technology
• High quality brass construction
• Chrome finish
• Deck mounted
• 15 years manufactuer's guarantee
• 0.5 bar minimum water pressure

Dimensions:
• Height: 130mm
• Projection: 164mm
Product Code ZR06_322DC
Global Trade Item Number 5055833652525
Type Bath Fillers, Bridge Bath Taps
Brand Crosswater
Brand Range Crosswater KH Zero 6
Minimum Water PressureMore information 0.5
Shape Rectangular, Round
Finish Polished Chrome
Style Modern
Mounting Type Deck Mounted
Tap Holes 2 Holes
Spout Type Straight Spout
Handle Type Lever, Dual Control
Cartridge TypeMore information Ceramic Disc
Temperature Control Manual
Number of Outlets 1 Outlet
Height (mm) 130
Projection (mm) 164
GuaranteeMore information 15 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.