Skip to navigation Skip to content

Clearwater Creta Single Lever Mono Sink Mixer with Swivel Spout

Rated 4.88/5 from 8 customer reviews

RRP £113 save 17%

£93.99

Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £27.33 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £20.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Modern monobloc kitchen mixer with swivel spout & single top lever
  • 2 finishes available: Polished Chrome or Brushed Nickel
  • 2 flow rates available: a standard or water-saving regulated flow
  • Single lever design for effortless one-hand control
  • 5 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Clearwater Creta Single Lever Mono Sink Mixer with Swivel Spout

A most popular tap at a great price, available with two flow rates; a standard flow and a water-saving regulated flow which is Sustainable Build Compliant.

Features:
  • Available in Polished Chrome finish (with or without flow regulator) or Brushed Nickel
  • Available in two flow rates: standard flow and a water-saving regulated flow (Sustainable Build Compliant)
  • Minimum 0.3 bar pressure required for standard flow version
  • Minimum 1.5 bar pressure required for flow regulator option
  • 180° swivel spout

Dimensions:
  • 35mm diameter mounting hole size
  • 120mm spout height

Product Overview
Product Code 27113bs
Type Mono Kitchen Mixers
Brand Clearwater
Brand Range Clearwater Creta
GuaranteeMore information 5 Years
Global Trade Item Number 5060406292206

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
AeratorMore information Yes
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Shape Round
Handle Type Lever, Single Control
Spout Type Straight Spout, Swivel Spout
Tap Holes Mono
Style Modern
Finish Brushed Nickel
Texture Brushed
Dimensions
Minimum Tap Hole Size (mm)More information 35
Height (mm) 148
Projection (mm) 224

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

(8)
Rated 4.88/5 from 8 customer reviews

£93.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.