Skip to navigation Skip to content

Sagittarius Plaza Pair of Basin Taps

Rated 4.00/5 from 1 customer review

RRP £139 save 29%

£98.99

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £32.99 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £24.75 with Clearpay Learn more about Clearpay

What's great about it?

  • Pair of basin pillar taps for independent control & flow of hot/cold supplies
  • Hard-wearing brassware with corrosion-resistant chrome plating
  • Quarter turn ceramic disc valves included
  • Suitable for low water pressure systems
  • 10 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Sagittarius Plaza Pair of Basin Taps

The Sagittarius Plaza pair of basin taps is 146mm in height and has a projection of 110mm. A stylish chrome finish that looks great and is easy to clean. Compatible with all water pressure systems.

Downloads
PDF Product PDF
Product Overview
Product Code PL/101/C
Type 2 Hole Basin Mixers, Basin Pillar Taps
Brand Sagittarius
Brand Range Sagittarius Plaza
GuaranteeMore information 10 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Finish Polished Chrome
Shape Square
Handle Type Lever, Dual Control
Spout Type L-Shaped Spout, Fixed Spout
Texture Polished
Tap Holes 2 Holes
Style Modern
Dimensions
Height (mm) 146
Projection (mm) 95
Flow Rate
Minimum Water PressureMore information 0.2

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(1)
Rated 4.00/5 from 1 customer review

£98.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.